Displaying The Set Programming; Editing The Programming For One Day Only - Nova Florida RESIA Hauptinstallations-, Betriebs- Und Wartungshandbuch

mode between Comfort and Night/reduction.
Once day 7 programming is complete, all the weekly programming is stored.
During programming and for ease of understanding, the display shows the day of the week and the hour being programmed.
day
time
To change the programming, repeat the entire sequence indicated above or follow the instructions in the next paragraph.

4.5.1 DISPLAYING THE SET PROGRAMMING

The set programming can be displayed without changing it. To display the current day program, turn knob A to Chrono and keep
knob B pressed for 5 seconds; to display the next day program, keep knob B pressed for a few seconds.
After 10 seconds without pressing knob B, you will return to the programming in progress.

4.5.2 EDITING THE PROGRAMMING FOR ONE DAY ONLY

It is possible to change the programming of a single day. To this end, turn knob A to Chrono and keep knob B pressed for 5 seconds
to display the current day program. Keep knob B pressed for 5 seconds to move on to the next day, so that you can choose the day
to be reprogrammed.
After selecting the day with knob B, set the desired level between Comfort and Night.
To confirm the new programming press knob B for 5 seconds, the new program will be stored.
26-EN