Operating Instructions; Operating The Tool - strapex STR 64 Betriebsanleitung

6
1
Fig. 4
1
Fig. 5
Fig. 6
12.11
All manuals and user guides at all-guides.com
OPERATING INSTUCTIONS
1

6.1 OPERATING THE TOOL

– Draw the strap from the dispenser, slide the strap
through the seal (4/1) and wind strap around the
package.
– Push the strap start a second time through the seal.
– Bend the strap start (5/1) below the seal 3–4 cm
(1–2").
– Pull the strap tightly by hand and take a portion of
the strap leading to the dispenser with the left hand
approx. 20 cm (8") away from the seal.
– Hold the handle (6/1) of the tool in the right hand
and raise the motor up to the stop.
– Insert the strap below the tension wheel completely
into strap guide. At the same time push the tool
forward against the seal.
– Release the motor.
Strapex STR 64
17