Technical Specification - Xblitz PARK VIEW Bedienungsanleitung

03. TECHNICAL SPECIFICATION

Camera resolution
Storage temperature
Working temperature
04. FAQ
1. The device does not turn on, the display is blinking.
It is necessary to charge the device's battery before the first use.
2. The device does not turn on / turns o automatically.
The reason for this may be constant powering by the cigarette lighter socket.
3. The device reboots while driving.
Check the power source.
4. Loop recording does not work (the device records randomly).
Check the functions "Motion Detection" and "Park Mode". They both should
be turned o while driving.
5. The device displays the message "memory card full".
Check the "G-sensor" and "Park Mode" sensitivity settings – both should be
set at a minimum. The memory card must be formatted in FAT32 format first
on the PC and then on the recorder.
6. The device records the noise and distorted, indistinct sound:
The device has a very sensitive microphone, which records all the sounds
from the environment. The sounds may overlap. Airflow windscreen e ectively
distorts the sound too.
WARNING: Use only chargers with charging current up to 2A.
(Do not connect directly to the 220 / 230V power outlet.) Failure to follow these
instructions could result in damage to the camera or, in extreme cases, to ignition.
Processor GP2248
Sensor H62
Front: 1920x1080, Back: 640×480p
View angle 140°
Photo resolution 1280 x 960p, 1600 x 1200p
Video format AVI / H.264
Photo format JPEG
-30 ~70°C
-10 ~50°C
Humidity 15-65%RH
Memory card microSD up to 32 GB
Power supply DC5V
23
EN