Peak DoorBird Connect Kurzanleitung Seite 27

2 Setting up the Doorbird IP Video door station
8. Click on Save.
Attention: If you want the door station to work, fill in the schedule.
The subsequent configuration defines at which times a call from the DoorBird IP video door
station to the PEAKnx touch panel is executed. Depending on the DoorBird model, the following
steps must be selected:
− For all devices with a single doorbell (e.g. D1101V, D2101V, etc.) you can find this item in the
expert settings under "Schedule for doorbell".
− For all devices with multiple doorbells (e.g. D1102V, D1103V, D1104V, etc.) you will find this
item in the expert settings under "Button configuration" in the settings. Select the desired
pushbutton, click on "Schedule for actions".
− For all devices with keypad (e.g. D21xx), you will find this item in the expert settings under
"Keypad" in the settings. Here, select the desired key combination and go to the "Sche-
dule for actions".
9. Click on the bell icon, select "SIP call" and fill in the schedule as desired.
Tip: You can completely fill or empty the schedule using the button in the upper right corner.
27