Connection And Setup - N'oveen DH300 Bedienungsanleitung

Best working environment: Temperature:30℃. Humidity: Over 85% Relative Humidity
THE AC/DC POWER ADAPTOR WILL BECOME HOT DURING USE. THIS IS NORMAL
AND DOES NOT MEAN THERE IS A FAULT.

CONNECTION AND SETUP

1. After removing the packaging materials, there should be 2 items:
a. Mini Dehumidifier
b. AC/DC Power Adaptor
2. Plug the DC power jack of AC/DC power adaptor to the DC power socket (at the back of
the dehumidifier), then connect the AC plug of the AC/DC power adaptor to the appropriate
wall mains socket.
3. Press the power button to "I" position and the mini dehumidifier will begin to operate. The
Green LED will be lit. Listen and feel for the air blowing from dry air outlet.
4. To switch off the unit, press the power button to "O" position.
CLEANING THE INSIDE OF THE WATER TANK
Important: The Water Tank Cover is detachable for cleaning purposes only.
First, turn off the dehumidifier and unplug it before removing the water tank. Dispose of the
water and clean the inside of the tank. After cleaning, place the cover and floating ball back
into the dehumidifier.
HOW TO (RE)INSTALL YOUR WATER TANK COVER
After cleaning your water tank,
1. Turn the tank cover over and place it on a flat surface.
Insert the float into the cover's aperture.
2.
3. Place the water tank over the cover, and press in smoothly.
4. Replace water tank into Dehumidifier.
REMOVABLE WATER TANK
When the water tank has reached its maximum capacity and the dehumidifier will
automatically stop, the LED will illuminate RED.
7