FLINQ Soundbar Play Handbuch Seite 4

EN Manual
Operation Instructions
Set-up your FlinQ Soundbar
1 Plug in power cord
Plug in the power cord and the indicator
will light up (stand-by).
Pairing Mode (bluetooth)
1 Plug in power cord
Plug in the power cord and the indicator
will light up (stand-by).
2 Switch on the soundbar
Switch on the soundbar by using the
power button on the soundbar or by using
the power button on the remote. After
switching the device on, the default input
mode will appear on the display.
2 Switch on the soundbar
Switch on the soundbar by using the
power button and change the input mode
to Bluetooth
3 Change input mode
Input modes can be changed by pressing
the power button again or by using the
mode button on the remote.
3 Search for bluetooth devices
Search for a new Bluetooth device on your Bluetooth audio player (PC, smartphone, tablet).
Choose the device named 'FlinQ Soundbar' in the list of new devices detected and select
it. The blue LED light will stop fl ashing when the soundbar is paired successfully. There
is no need to pair again, when you connect the same device next time, because it will be
reconnected immediately (if Bluetooth is activated).
Note: When unable to detect the soundbar while pairing, please restart the device and
try it again
FlinQ Soundbar Play