Clarion CMM-10GR Bedienungsanleitung Seite 6

• Long press to access settings
/
• Short press to navigate menus and settings
• Short press to make selections
Setting
Z2/SUB Configures preamp outputs: Z2 (rear) or Subwoofer
BEEP Audible button press confirmation: On or Off
AREA Configures tuner region: USA, Europe, Australia or Other
DIMMER Configures display and button brightness from 0 to +10
DIAG Displays software version for diagnostics
• Short press to access settings
/
• Short press to navigate menus and settings
• Short press to make selections
Setting
BASS Bass level control from -10 to +10
TREBLE Treble level control from -10 to +10
BALANCE Balance control from full left (L10) to full right (R10)
FADER Fader control from full front (Z1: 10) to full rear (Z2: 10)
SUB Subwoofer preamp level control from 0 to +10 (Z2/SUB must be set to SUB)
• Short press to access settings/stored presets
• Long press to store a frequency as a preset (up to 9 FM and 9 AM)
/
• Short press to navigate menus and settings
• Short press to make selections
Setting
DELETE Select from stored presets for removal
REPLACE Permits replacement when all preset locations are occupied
CMM-10GR_MAN_all.indd 6 CMM-10GR_MAN_all.indd 6
SYSTEM MENU SETTINGS
Function
AUDIO MENU SETTINGS
Function
FAVORITES MENU SETTINGS
Function
6
2/24/23 9:34 AM 2/24/23 9:34 AM