Klarstein 10012347 Bedienungsanleitung Seite 7

1. Crumb tray
2. Variable width toasting slots
3. Cancel button
4. Reheat button
5. Frozen button
6. Carriage control lever
7. Electronic variable browning control
1. Insert the plug into a suitable mains supply socket and turn the power on.
2. Place up to two slices of bread, muffi ns, or bagels into bread slots.
3. Select the desired browning setting, from No.1 to No.6 on the browning control knob. (No.1-
lightest, No.6-darkest).
When using the toaster for the fi rst time we suggest you toast on number 3. Varying types of
bread and personal preference may require a diff erent browning setting.
4. Press the carriage control lever down until it clicks into place. Toasting cycle will automatically
commence. Please note: if the toaster is not plugged in and switched on at the power point the
carriage control lever will not click into place.
5. The toaster turns off when the desired toast colour is achieved and automatically raises the toast.
The toasting process can be stopped at any time by pressing the cancel button.
TOASTING FROZEN BREAD:
To toast frozen bread, place the bread into the bread slots and select the desired Browing Setting. Press
the carriage control lever down until it clicks into place then press the Frozen Button.
REHEATING TOAST:
The toaster allows you to reheat toast without additional toasting. To reheat, place toast into bread slots,
lower the carriage control lever until it clicks into place and press the Reheat Button.
7
All manuals and user guides at all-guides.com
SCHEME SCHEME
Operation Operation