Safety Instructions; Units Of Measurement; Product Description; Other Symbols In This Documentation - STIEBEL ELTRON ZSA 315 Installation

InstallatIon
General information
InstallatIon
1. General information
this document is intended for qualified contractors.
Note
Read these instructions carefully before using the ap-
pliance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1

Safety instructions

1.1.1 Structure of safety instructions
KEYWORD Type of risk
Here, possible consequences are listed that may re-
sult from failure to observe the safety instructions.
f Steps to prevent the risk are listed.
1.1.2 Symbols, type of risk
Symbol Type of risk
Injury
1.1.3 Keywords
KEYWORD Meaning
DanGER Failure to observe this information will result in serious
injury or death.
WaRnInG Failure to observe this information may result in serious
injury or death.
CaUtIon Failure to observe this information may result in non-se-
rious or minor injury.

1.2 Other symbols in this documentation

Note
General information is identified by the adjacent sym-
bol.
f Read these texts carefully.
Symbol Meaning
Material losses
(appliance damage, consequential losses and environ-
mental pollution)
appliance disposal
f this symbol indicates that you have to do something. the
action you need to take is described step by step.

1.3 Relevant documents

operating and installation instructions of the heat
pump or ventilation unit
6 |

1.4 Units of measurement

Note
all measurements are given in mm unless stated oth-
erwise.
2. Safety
only qualified contractors should carry out installation, com-
missioning, maintenance and repair of the product.
Note
observe all applicable national and regional regula-
tions and instructions.

3. Product description

the product is an adaptor for attaching an air hose from an
existing wall outlet to the air connections of the unit.
Product name
Zsa 315
Standard delivery
Quick-fit adaptor
Hose clip with sealing tape for securing the inner hose
Hose clip for securing the outer hose
Knurled screw
slotted screw for attachment to the appliance
4. Installation
4.1 Fitting the air hose to the quick-fit
adaptor
2.
f slightly pull back the external hose and the thermal insu-
lation, so that the internal hose of the air hose protrudes
a little.
Part number
236934
Quantity
1
1
1
3
1
1.
Zsa 315