(En) Safety Instructions Rsm-Ex 01 Atex/Iecex - Pepperl+Fuchs Ecom RSM-Ex 01-Serie Bedienungsanleitung

These safety instructions contain information and safety regulations which are to be ob-
served. Non-observance of this information and these instructions can have serious con-
sequences and may violate regulations. Please read these safety instructions carefully
before starting to use the device! In the event of conflicting information the details specified
in the safety instructions shall apply. In case of any doubt (in the form of translation or
printing errors) the English version shall apply.
Faults and damage:
If there is any reason to suspect that the safety of the unit has been impaired, it
must be withdrawn from use and
removed immediately from the Ex-area. We recommend that the unit is returned
to the manufacturer for the inspection.
The safety of the device may be compromised if for example:
• there is visible damage to the housing
• the unit has been subjected to excessive loads
• the unit has been improperly stored.
• the unit has been damaged in transit.
• unit markings or inscriptions are illegible
• malfunctions occur
• permitted limit values have been exceeded
• minimum distance of 10 cm between the device and ear!
Approval:
EU type approval test certificate no.: IBExU18ATEX1124 X
Ex-Marking:
Ambient temperature:
IECEx Certificate of Conformity no.: IECEx IBE 18.0016X
Ex-marking
Ambient temperature:

(EN) Safety Instructions RSM-Ex 01 ATEX/IECEx

† II 2G Ex ib IIC T4 Gb
† II 2D Ex ib IIIC T135°C Db IP64
† I M2 Ex ib I Mb
-20°C ≤ Ta ≤ +55°C
Ex ib IIC T4 Gb
Ex ib IIIC T135°C Db IP64
Ex ib I Mb
-20°C ≤ Ta ≤ +55°C
3