TELEPASS SAT K1 Betriebsanleitung Seite 13

SETUP FROM THE DEVICE
Function navigation diagram
The device functions are accessible according to the
following diagram:
Consult the data
NOTICE: sanction risk. Before departing, make sure
the data set on the device and the real vehicle
specifications match.
1. Press the function button: the device
announces "K1 configuration".
2. Press the + or - button: the devices announces
"K1 information", then press the function button
to confirm.
3. Press the + or - button to select the
information for consultation, then press the
function button to confirm the desired
adjustment: the device announces the
information recorded.
It is possible to consult the following information:
device identification
l
software installed
l
any faults recorded
l
active services
l
vehicle plate number
l
Select the language
1. Press the function button: the device
announces "K1 configuration".
2. Press the function button to confirm: the
device announces "Tolling configuration".
3. Press the + or - button: the device announces
"Language selection menu".
4. Press the function button to confirm: the
device reads the currently set language.
5. To change the current language, press the +
or - button to select the desired language.
Then press the function button to confirm. The
device announces the language set.
Check and modify the number of axles
Consider all vehicle and trailer or semi-trailer axles,
including the double tandem axle and liftable axles.
Telepass SpA - Via Laurentina, 449 - 00142 Rome (RM) - Italy - www.telepass.com
For caravans and buses, do not consider any trailers.
Check the number of axles set on the device and
change it if necessary. Review the setting each time
a trailer is hooked up or removed.
NOTICE: modify the settings with the motor on but
with the vehicle stopped.
1.
2.
3.
4.
5.
Each time the settings are changed, a notification is
sent to the Telepass Truck App.
Check and modify the vehicle weight
NOTICE: modify the settings with the motor on but
with the vehicle stopped.
1.
2.
3.
4.
5.
Each time the settings are changed, a notification is
sent to the Telepass Truck App.
TLP-K1-Uso-1.1_A4_EN-0123 © 2023
Press the function button: the device
announces "K1 configuration".
Press the function button to confirm: the
device announces "Tolling configuration".
Press the function button to confirm: the
device announces "Axles configuration".
Press the function button to confirm: the
device announces the number of axles
currently set.
To modify the current settings, press the + or -
button to select the number of axles desired,
then press the function button to confirm: the
device emits a short acoustic signal and
announces the number of axles set.
Press the function button: the device
announces "K1 configuration".
Press the function button to confirm: the
device announces "Tolling configuration".
Press the function button to confirm: the
device announces "Weight configuration".
Press the function button to confirm: the
device reads the weight range currently set.
To modify the current settings, press the + or -
button to select the weight range desired, then
press the function button to confirm: the
device emits a short acoustic signal and
announces the weight range set.