Abbildung 42. Kabelführung für Konfigurationen mit einer vorderen 8 x 3,5-Zoll-SAS/SATA-Rückwandplatine und einem
8i RAID/HBA-Adapter
Anmerkung: Stellen Sie bei Installation eines RAID/HBA-Adapters (Gen. 4) sicher, dass Sie das
entsprechende Gen-4-Kabel verwenden:
ThinkSystem SR655 3.5" SAS/SATA 8-Bay X40 RAID Cable Kit
Kabel
Von
SAS 0-Anschluss auf der Rückwandplatine
SAS-Signalkabel
1
SAS 1-Anschluss auf der Rückwandplatine
Servermodell mit 12 x 3,5-Zoll-Laufwerkpositionen an der Vorderseite (SAS/SATA)
Dieser Abschnitt enthält Informationen zur Kabelführung für das Servermodell mit einer vorderen 12 x 3,5-
Zoll-SAS/SATA-Rückwandplatine.
•
„Konfiguration 1: eine vordere 12 x 3,5-Zoll-SAS/SATA-Rückwandplatine, Onboard-Anschlüsse" auf
Seite 61
•
„Konfiguration 2: eine vordere 12 x 3,5-Zoll-SAS/SATA-Rückwandplatine, ein 16i RAID/HBA-Adapter" auf
Seite 61
•
„Konfiguration 3: eine vordere 12 x 3,5-Zoll-SAS/SATA-Rückwandplatine, eine hintere Laufwerkhalterung
(SAS/SATA)" auf Seite 62
•
„Konfiguration 4: eine vordere 12 x 3,5-Zoll-SAS/SATA-Rückwandplatine, eine hintere Laufwerkhalterung
(SAS/SATA), einem 16i RAID/HBA-Adapter" auf Seite 63
60
ThinkSystem SR655 Konfigurationsanleitung
Bis
RAID/HBA-Adapter
• Gen. 3: C0
• Gen. 4: C0
RAID/HBA-Adapter
• Gen. 3: C1
• Gen. 4: C0