Lcd-Display - SODECA CRF/EW-190-M Betriebsanleitung

8. Software configuration
To improve the CPC configuration, the
equipment is supplied with PC software.
The Sodeca CPC Utility programme allows
the user to choose the port to which they want
to be connected, as the CPC enables the
configuration of the different CPC equipment
applications and parameters: constant flow
rate, with a constant pressure or with a
Maximum and a Minimum value. The text box
below the "show last logs" tab contains a text
box that displays the latest errors generated in
the equipment. An errors log can be obtained
by selecting the tab "show last logs". With a
log of the errors detected in the equipment.
If the equipment is not supplied through an electrical power source and the option exists
of supplying the electronic board through the PC. To do this, activate the "jumper J22" and the electronic board is supplied
with power through the USB port.
9. Configuration of the browser menus
Buttons A and C are used to change the configuration menu. To select the menu to be accessed, click on button B.
Once inside the configuration menu, a flashing value will appear. To increase the value use button C and to reduce it, use
button A. Once the new value has been defined, use button B to
set it and change the screen.
9.1 STATUS
STATUS
CONFIGURATION
MODBUS
LCD DISPLAY
A B C D
SW3 SW4 SW1 SW2
CONFIGURATION
LANGUAGE
CONFIGURATION
ALARMS
A: Back
B: Select
C: Forward
D:
CONFIGURATION
APP
CONFIGURATION
PARAMETERS