Herunterladen Inhalt Inhalt Diese Seite drucken

VirtuFit Etappe 2.0i Bedienungsanleitung Seite 13

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ENGLISH
Start pedalling.
After pedalling, remember to press the safety button before
unfastening the safety belt.
You can now get off the bike safely.
MOVING
CAUTION!
Store the unit in a dry place out of reach of children.
Make sure the unit is stable and secure to prevent it from falling on
Final inspection
children or animals.
1.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual.
2.
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Moving the Machine
Push the handlebar down until the transport wheels of the front
1.
Remove the power cord.
stabiliser touch the ground. When the transport wheels touch the
2.
Use the Transport Handle to carefully lift the machine onto the transport rollers.
ground, the bike can be easily moved to the desired location.
3.
Push the machine into position.
4.
Carefully lower the machine into position.
Note: The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you and others are all physically
TRAINING WITH HEART RATE
fit and able to move the machine safely.
Leveling the Machine
The machine needs to be leveled if your workout area is uneven or if the Rail Assembly is slightly off the floor. To adjust:
Hand sensors
1.
Place the machine in your workout area.
2.
Safely stand on the back of the Rail Assembly for approximately 20 seconds.
3.
Step off the machine.
4.
Loosen the locking nuts and adjust the levelers until they all contact the floor.
This VirtuFit fitness machine is equipped with hand sensors for
measuring heart rate. The hand sensors are attached to the handle
and only work if both sensors are held for a longer period of time. For
optimal performance, it is important that the hands are slightly moist
and exert constant pressure on the sensors. Hands that are too dry or
moist may cause abnormal readings.
5.
Adjust until the machine is level. Tighten the locking nuts.
Note: Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or damage to the machine can occur. Make sure
NOTE!
To avoid interference, never use the hand sensors with a
the machine is level and stable before you exercise.
wireless heart rate monitor.
Wireless heart rate receiver (5 kHz)
This VirtuFit fitness device is equipped with a wireless heart rate
receiver. For the heart rate measurement with a wireless heart
rate monitor, you use a heart rate monitor which works on a 5 kHz
frequency. With a wireless heart rate monitor, it is important that the
electrodes are slightly moist and the heart rate monitor fits well to
your body. Refer to your heart rate monitor's user manual for proper
instructions. Incorrect use of the heart rate monitor may result in
abnormal readings.
NOTE!
A wireless heart rate monitor is not included as standard.
Contact your dealer to purchase a wireless heart rate monitor.
To avoid interference, never use the wireless heart rate
monitor in combination with the hand sensors.
WARNING!
If you have a pacemaker, we recommend that you consult
your physician before using a wireless heart rate monitor
In rooms with multiple heart rate monitors, it is recommended
that you keep enough distance to avoid interference between
different devices.
Always try to keep the wireless heart rate monitor within a
range of 1 meter from the console for optimal reception.
Always wear a wireless heart rate monitor directly on the
body, under clothing.
TRAINING WITH FITNESS APPLICATIONS
VirtuFit does not provide service for third party fitness applications
such as Kinomap, iConsole, FitShow etc. If you encounter problems
with a third party fitness application, please contact the developer
of the application in question.
Instruction
To scan the QR code with an Android or IOS phone or tablet, a
QR code scanner is required. The app for scanning QR codes can
be downloaded from the App Store or Google Play Store.
Scan one of the QR codes below to go directly to the App Store or
Google Play Store page where the fitness app can be
downloaded.
Scan the QR code on the right to access the fitness app
manual. The manual describes step by step how to connect the
11� � �
fitness app to the device, how the fitness app works and what its
capabilities are.
Fitshow
APP STORE
GOOGLE PLAY
MANUAL
13

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vfspinbike-e2.0i

Inhaltsverzeichnis