Setting Method; Timing Alarm Setting; Clock Setting - Avtek PRESENTER Gebrauchsanweisung

VI. Setting method

6.1 Timing alarm setting

Press【
□
to set. The first number of【
Push 【
Push【 】or【 】to shift the time place.
setting 6.1 and enter into 6.2 automatically.
If you don't want to set 6.1 , previous【 】flashing. Push【 】
□
to enter into 6.2
Note: Any 6.1 setting record will be deleted if user overleap 6.1 to 6.2
directly
Remark:
1. 【 】 corresponding to standard time system. From left to right is hour
decade, hour unit, minute decade, minute unit.
2. It will remind the user by vibration when reaches the time set. Please
press 【 】 to stop !
automatically.

6.2 Clock setting

You will enter into the clock setting mode after finish 6.1.
□
【
Push【 】or【 】to change the number on flashing place.
Push【 】or【 】to shift the time place. Press【 】again to save setting
and exit the current mode.
If you don't want to set 6.2, previous【
□
exit 6.2.
】 3 seconds. 【 】 icon will be flashing. Press 【
】 or 【 】 to change the number on flashing place.
Otherwise it will keep shaking 30 seconds
】will be flashing. Press【 】 to set.
】is flashing.
】flashing. Push【
17
Press 【 】to save
】
】to