Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Cleaning and Maintenance
Your clipper is fitted with high quality ceramic blades and stainless steel blades
that are permanently lubricated. To ensure long lasting performance of your
clipper, clean the blade assembly regularly.
To detach the blade assembly (6), first remove the comb as described above
and then remove the blade assembly. To remove the blade assembly, place
your thumb against the underside of the blade assembly (white ceramic blade)
and force the assembly forward until it releases with an audible click. Be careful
not to let the blade assembly fly off.
Rinse the blade assembly under running water and remove all hair stuck
between the blades. To reattach the blade, hook the blade assembly into the
horseshoe-shaped top of the blade assembly retainer and press the blades
down until they snap into place with an audible click.
Do not disassemble the clipper any further, it does not contain any parts
serviceable by you.
Do not immerse the remaining parts of the clipper besides the blade assembly
in liquids of any kind. Also, do not use abrasives or aggressive chemicals to
avoid damaging the surfaces.
Technical Data
Clipper
Input:
Charging Time:
Operating time:
Battery:
Blades:
Charging Station
Input/Outpu:
Power Mains Adapter
Input:
Output:
Protection Class:
5 V
, 0,8 A, 4 W
90 min
60 min
1x 3,7 V, 600 mAh, 2,22 Wh, Li-Ion
Stainless Steel, Ceramic
5 V
, 0,8 A
100-240 V~ 50/60Hz, 0,2 A
5 V
, 0,8 A, 4 W
II
9
Werbung
Inhaltsverzeichnis
