EUROM Fly Away Plug-in LED Bedienungsanleitung Seite 13

Use and Maintenance
Using
Make sure that the power socket you intend using has the correct voltage
220/240V~50Hz. The lamps will start burning and the device will start operating.
Cleaning
Clean the device once a week. Remove the device from the power supply, keep the device
in a vertical position to prevent the spread of dead insects. Pull out the collection tray at
the back of the device and remove the dead insects. After cleaning and drying thoroughly,
replace the collection tray correctly. Clean the outside with a dry or well-wrung damp
cloth. Do not use abrasive or corrosive cleaning agents.
Any faults
Check whether the plug is properly inserted into the wall socket and whether the power
supply is okay. For all other causes, please contact a qualified professional.
WARNING
The lamps in this device cannot be replaced. Let the device destroy when the
lamps fail according to the local laws and regulations.
Disposal
At its end of life, discard the device according to the local laws and regulations, or deliver
the device to your supplier.
Attachments
The CE declaration can be found at the end of this manual.
13