Sign In To Your Sophos Switch - Sophos CS101-8 Kurzanleitung

ENGLISH

5. Sign in to your Sophos Switch

Sophos provides users an option to sign in to the switch for advanced configuration. The advanced
options can be configured in the on-box web interface of the switch or through its command line
interface (CLI).
1. Register the switch in Sophos Central as mentioned in the above section.
2. An IP Address will be assigned to the switch from either Sophos Central or the DHCP server
3. Open a web browser on your computer enter the IP address and press enter.
4. In order to access the CLI or the web interface of the switch after registering it in Sophos Central, use
the default credentials with the username as "admin" and the unique password for this switch.
6. Managing the Switch via the Console Port
1. Connect the switch console port (not available on CS101-8/8FP models) to a computer using the
console cable provided.
2. Launch any terminal emulation program, e.g., PuTTy
3. Select the COM port, and use the following settings:
 Baud Rate: 115200
 Data bits: 8
 Parity: None
 Stop bits: 1
 Flow Control: None
4. Press Enter on your keyboard to connect to the CLI.
5. Sign in using the username "admin" and the unique password for this switch.
6
* The unique password is printed on a sticker (see picture to the right) affixed to the
chassis of the switch and on an additional sticker in the packaging materials.
*
*
Quick Start Guide
duEg3@!oQb
Sophos Switch Series