Fault Diagnosis - GRAU Team Pro TM20-0 Bedienungsanleitung

Fault diagnosis

Problem
The motion detector
is not working, the lu-
minaire is permanently
switched on.
The status light is
yellow.
The status light is red.
Possible cause
The motion detector is
deactivated. The status
LED is blue.
Communication
problem with the
sensor.
Signal problem with
the light sensor.
Team Pro
Possible solution
Briefly tap the button
4 times. Once the
status LED is off, the
motion detector is
activated.
The lamp head and
sensor module should
be sent in for in-
spection.
The lamp head
should be sent in
for inspection.
23