Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.
Open the lock by inserting the key in the keyhole. Turn the key clockwise
to unlock.
2.
Remove the padlock from the pin. Pull the chain through a fixed ring,
preferably mounted on a wall or floor.
3.
pull the chain through a fixed point on the object (e.g. chassis)
4.
Move the pin through the loop of the chain.
5.
Place the pin through the object which you want to secure, e.g. a car,
camper, caravan, boot or trailer wheel.
6.
Place the padlock back on the pin and close the lock by turning the key
counterclockwise.
–
When removing the lock, make sure you wipe off any dirt or water from
usage and store it in dry environment.
–
In case of a lost key, please contact customer support.
–
We deliver a high-quality product. In case of a defect, please contact our
customer support.
1.
After closing, check if the padlock does not fit through the opening to
make sure the object is secured.
2.
Keep the key number, invoice, this manual and the spare keys in a safe
place at all times.
3.
Store the spare keys in a place that is easy to remember.
4.
Always watch your fingers while installing the lock.
5.
JJV Locks B.V. is not liable for any theft of goods stored in the top box.
EN - Manual
INSTRUCTIONS
MAINTENANCE
WARNINGS
6
Werbung
