Windgoo M20 Bedienungsanleitung Seite 7

2.2 Func�on introduc�on
1. Switch on / off: long press the power bu�on to turn on / off the power.
2. Accelera�on: Press the accelerator bu�on on the right hand to start and accelerate.
3. Brake: press the brake handle on the le� handlebar to brake.
4. Up and down gear: when the machine does not accelerate a�er star�ng up, gently press the XX bu�on to cycle
up and down gear.
5. Headlights on /off: Turn on and off the headlights by pressing the bu�on above the headlight when the machine
is turned on without accelera�on.
6. Cruising at constant speed: (cruise can be increased according to customer's requirements) Turn the thro�le to a
certain posi�on and hold for 6-8 seconds to enter the cruise mode at constant speed. At this �me, release the
thro�le and the scooter will automa�cally drive at a constant speed. Press the thro�le or brake lightly, and the
cruise control will be canceled.
7. Warning: the instrument has been set. Please do not change the parameters arbitrarily. If the parameters are
changed privately, there will be no warranty.
Grip
Brake handle
Display instrument
Power bu�on
Gear posi�on
Accelerator handle
07
Current speed
Power
Upshi� key
Speed unit
Power bu�on
Total mileage
Downshi� bu�on