Installation - ecoQ SilentAir Grande Gebrauchsanweisung

Installation

1. Base installation
a. Align the column and head assembly
with the hole in the base and insert it
(as shown with arrow A).
b. Insert the column and head assembly
into the base, and check that the hole
positions of the column and head
assembly and the base are perfectly
matched; insert the base fixing screw
into the corresponding hole (as shown
with arrow B).
c. Tighten the fixing screw clockwise with
the allen key and place the base in a
flat position after tightening to prevent
it from toppling and damaging to the
assembly.
2. Rear Grille Installation
a. Please align the rear grille with the
corresponding buckles on the front of
the motor and tighten the guard grille
clockwise with the guard nut.
42 | Instruction Manual ecoQ SilentAir Grande
Guard nut
Allen key
Fixing screw