Using The Display - ECTIVE BM X Bedienungsanleitung

USING THE DISPLAY

After some time, the battery monitor switches to a power-
saving standby mode. Activate the display by pressing any
key.
From the start screen, press the
menu. From here, press the
screen of the display.
In the settings menu, press the
settings. The individual items are now displayed flashing
red.
Use the key to select a value and press the
change this value.
Finally, press the
key to discard any changes and return to the start screen.
You can change the following settings:
• CAPACITY (preset capacity): A default capacity is set at
the factory. Please set the actual capacity of your battery
here.
28 BM X | Using the Display
key to return to the start
key to save all changes. Press the
key to enter the settings
key again to adjust the
key to