Timer Function - Siguro SGR-FN-S470W Bedienungsanleitung

• You can use the control panel on the body of the appliance or the remote control to
control the fan. The buttons for both controls and their functions are described below.
• Before using the remote control, you must insert in it two AAA batteries.
• Plug the power cord into the electrical outlet.
• The fan beeps briefly, indicating that the fan is ready for use.
Turn the fan on/off by pressing the z button on the remote controller or on the
•
control panel.
Description of the control panel and remote controller
On/Off button
Speed setting button
Rotation speed setting
To set the speed use the button
switch between by pressing the button. If you hold down the button for a longer time, the
speed levels will move faster. The current speed level will be shown on the display above
the control panel.

Timer function

This function allows you to set the time and when it elapses the fan will turn off
automatically.
Setting the timer using remote controller:
• Set the timer by repeatedly pressing the
Setting the timer using the control panel:
• Press and hold the
mode.
• Press this button repeatedly to set the desired value.
The timer can be set from 1 to 12 hours. „0" setting means that the timer function is off. If
the timer function is active, the symbol
Horizontal oscillation
Turn the horizontal oscillation of the fan motor on/off by pressing briefly the
the remote controller or on the control panel.
. The fan contains 12 speed levels, which you can
button on the control panel. The fan is now in timer setting
on the display will light up.
Horizontal oscillation setting
button
This button is also used to set the
timer on the control panel.
Timer setting button.
Note: This button is located only on
the remote controller
button on the remote controller.
USE
button on
9