Use; Before First Use - Siguro SGR-EB-A150W Bedienungsanleitung

EN
1 Heating blanket
2 Control unit
3 Temperature setting slide control
4 Switch-on indicator light
Power supply
Input
Dimensions
Control unit model

USE

Before first use

Remove the appliance and accessories from the box. Before disposing of the packa-
ging, be sure to remove all components. Check the appliance or accessories are not
damaged.
Using
1. Lay the blanket on the place where you want to use it. The part where the
control unit is located is the top part. The blanket must be spread and folded out
completely, it must not be folded, bended, or creased.
2. You can fix the corners of the blanket to the bed or matrass by non-metal straps to
ensure the blanket will not roll. You can spread a thin sheet on the blanket. Make
sure it is evenly distributed.
3. Unwind the power cord and insert the power plug into a power socket.
4. Use the control unit to set the desired temperature in the range from 1 to 3, where
"1" represents the lowest temperature level and "3" the highest temperature level.
The indicator light will illuminate as well.
5. The preheating normally takes 30 up to 50 minutes so if you need to heat the
blanket quickly, set the highest temperature and then, lower it as needed.
Warning:
While the blanket is running, do not cover the control unit by other blan-
kets, pillows, or other similar items. It is important the control unit is easily
and freely accessible in case of a sudden switch-off.
6. If you want to use the blanket for a longer time, e.g., overnight, set the temperature
level to "1".
7. When you do not use the blanket, switch the control unit to "0" position, the
indicator light switches off and the blanket stops heating. Disconnect the plug
from the power socket.
220–240 V~, 50–60 Hz
60 W
150 x 80 cm
RU11
EN - 8
3