Warm Audio WA-MPX Bedienungsanleitung Seite 7

WA-2MPX TECHNICAL SPECS - FRONT & REAR PANEL [DUAL-CHANNEL]
A simple list of feature / specification identification will be provided below the WA-2MPX product images.
For detailed descriptions of the feature functionality, please refer to the descriptions found in the WA-MPX
(single-channel) technical specs section.
Note: All applicable LEDs on WA-2MPX models will illuminate when their corresponding switches are engaged
WA-2MPX - FRONT PANEL [DUAL-CHANNEL]
1
5
1. Input Select Switch
2. Preamplifier Gain
3. Output Level
4. VU Meter
5. TS Instrument Input
6. +48V Switch
7. High Gain Switch
8. Polarity Switch
9. Tone Switch
10. 80Hz Hi-Pass Filter
11. 2kHz Low-Pass Filter
12. Tape Saturation Control
13. Power Switch
2 3
9 10
6 7 8
4 14
11 12 13 18 19
14. [Channel 2] VU Meter
15. [Channel 2] Preamplifier Gain
16. [Channel 2] Output Level
17. [Channel 2] Input Select Switch
18. [Channel 2] +48V Switch
19. [Channel 2] High Gain Switch
20. [Channel 2] Polarity Switch
21. [Channel 2] Tone Switch
22. [Channel 2] 80Hz Hi-Pass Filter
23. [Channel 2] 2kHz Low-Pass Filter
24. [Channel 2] Tape Saturation Control
25. [Channel 2] TS Instrument Input
15 16
20 21 22 24
23
17
25
6