Installing The App; Power On/Off - fontastic LEMA 610CH Kurzanleitung

GB
FontaFit max app
The companion app „FontaFit max" is used to connect the smartphone
to the watch and synchronize settings, as well as activity data with
the watch. The app is also responsible for reading notifications (e.g.
WhatsApp, calls, SMS) from the smartphone and forwarding them to
the watch.

Installing the app

Download and install the „FontaFit max" app by
scanning the QR code, or search for „FontaFit max"
in App Store or Play Store.
www.fontastic.eu/fontafit_max
Link:
Note: The app supports iOS 12.0 and Android 5.0 or higher
operating systems, as well as BT 5.0 & 3.0.
Note: Please refer to the privacy policy for processing your perso-
nal data in the app or at www.fontastic.eu/privacy_fontafitmax.
11

Power On/Off

Switching on: To turn on the smartwatch, press and hold the button
(2) until the display turns on.
Switching off: To turn off the smartwatch, activate the display with the
button (2) and press and hold it again until you are in the power
off menu. Tap on „Switch off" and confirm your selection.
Connecting and using the app
Your Fontastic ® Smartwatch LEMA needs to be connected to your
smartphone via the „FontaFit max" app. Do not connect the fitness
watch and your smartphone directly via the Bluetooth
smartphone.
1. Activate Bluetooth ® on your smartphone and turn on the smartwatch.
If you have not yet downloaded the FontaFit max app, you can install
it by scanning the QR code displayed on the smartwatch.
2. start the „FontaFit max" app, accept the privacy policy and select the
„Add device" area in the „Settings" section.
3. If the app asks for permissions, please accept them so that the
smartwatch can be found and select the watch from the list.
4. Confirm the connection on the smartwatch.
® function of the