Installation; Standard Delivery; Accessories - STIEBEL ELTRON GWS 1 Installation

INSTALLATIoN

Installation
Groundwater station GWS 1
6
6
5
1 Air vent valve
2 Plug-in connector
3 Drain valve
4 Intermediate piece made from EPP
5 Heat exchanger
6 3-way ball valve with flushing facility
Groundwater station GWS 2
5
5
4
1 Air vent valve
2 Plug-in connector
3 Drain valve
4 Heat exchanger
5 3-way ball valve with flushing facility
18 |
4 3
3
2.1

Standard delivery

Delivered with the groundwater station:
1
- 4 double ended screws with rawl plugs, washers and nuts
- 1 air vent valve
2
- 1 drain & fill valve
- 1 contact sensor

2.2 Accessories

- Brine pressure switch
3. Installation
Note
We recommend not to install the groundwater mod-
2
ule in wet rooms. Wet rooms include rooms used, for
example, for washing or drying clothes.
To protect the groundwater station against damage, it must
be transported to the installation location inside its original
packaging.
f Install the groundwater station in a suitable location next
to or above the heat pump.
1
2
f Ensure that the wall structure can bear the weight of the
groundwater station before securing the groundwater
station to the wall.
2
GWS