Using The Timer - Speedlink Acute Supreme Bedienungsanleitung

EN

USING THE TIMER:

1. Start the presenter by switching the On/Of button to "On".
2. Press the "Set timer" button . The dots in
display start blinking.
3. Set the minutes with the "Forward" and
"Backward" buttons.
4. Press the "Set timer" button again to apply the time.
Dots in display stop blinking.
5. Start the timer by pressing the "Countdown" button .
The presenter will send a vibrating signal.
6. Press the "Countdown" button to pause the timer.
The presenter will vibrate twice to airm the pausing.
7. The presenter will vibrate 4 times, when the time is up.
8. Hold the "Countdown" button for ca. 3 seconds to reset the
timer. The presenter will vibrate 4 times to airm the reset.
USING THE MOUSE MODE:
1. Press and hold the "Mute/Unmute/air mouse mode"
button for 3 seconds to enable/disable the air mouse mode.
2. Move the cursor by moving the presenter.
3. Press "Mouse left button" and "Mouse right button"
to use the corresponding mouse controls.