SURFOLA SF530 Bedienungsanleitung Seite 15

EN
Wi-Fi Connection
Connect your phone to the camera wirelessly. You can control the camera, and download
recordings from the camera to your phone.
• Turn on the camera, then press the UP button to turn on Wi-Fi. The orange light at the
top of the camera lights up when Wi-Fi is on.
• Switch on Wi-Fi on your phone and scan for Wi-Fi connections.
• Find and connect with "ActionCam****", Wi-Fi password: 1234567890
• Open the "iSmart DV2" app on your phone.
• To turn off Wi-Fi and disconnect, press UP button again.
Note
• When you use your mobile phone to operate the camera, the camera screen will stay off.
• The camera can only connect to one device at a time.
• Using the Wi-Fi connection is more energy-intensive; avoid using it when the camera
is low on battery.
Operating Camera via the 2.4GHz Remote Control
Using the remote control to take photos or record videos by pressing the photo button
(red) or video button (gray). It operates in the current photo or video mode, or switches
to standard photo or video mode to capture. After using the remote for a long time, the
battery will eventually need to be replaced. Unscrew the four small screws on the back
of the case and replace with a new CR2025 cell battery.
10