nor-tec 39309 Gebrauchsanweisung Seite 5

How to Play Multimedia
Press the "home" (4) button on the
remote to enter the home menu.
Use the arrow keys (3) to indicate the
"USB" input and then press the "OK"
button (10) to choose it. Use the same
buttons to go through the menu and
select the files you want to play.
How to change the system settings.
Use the "arrow keys" (3) and the "enter"
button (10) to select the setup menu
and enter one of the submenus and
change their settings.
Submenus:
PICTURE: Change the picture settings
and properties of the image. (See the
changeable parameters in the box.)
Picture Mode
Contrast
Brightness
Tint
Sharpness
Focus
Colour Temper-
ature
Noise Reduction
SOUND: Change the sound setting
OPTION: Change the system settings,
language, upgrade the software, and
see the current version.
Standard
50
50
50
50
0
Medium
Middle
Distance table
Refer to the table below to correctly
set up the projector from the projec-
tion screen or target. When installing,
place the projector on a solid and stable
surface or use a mount to put it on
the ceiling. Do not cover or block the
vent. Keep a 30 cm clear space with no
obstructions around the went and keep
the air around the unit well-ventilated.
Aspect ratio
Picture size (inch) Projection
50"
70"
100"
120"
Note: The above data is for reference
only.
5
16:9
distance (m)
1.41
1.97
2.81
3.37
EN