Safety Precautions; Specifications - EK -Nucleus AIO CR360 Dark Installationshandbuch

Please follow the instructions in this manual for proper installation. Improper installation
may result in damage to your equipment. EK Water Blocks assumes no liability whatsoever,
expressed or implied, for the use of these products, nor their installation. The following
instructions are subject to change without notice. Please visit our website at www.ekwb.com
for updates.

1. SAFETY PRECAUTIONS

1. Keep and store the product away from the reach of children.
2. Check the component list and condition of the product before installation. If there is any
problem, contact the shop where you purchased the product to get a replacement or refund.
3. EKWB d.o.o. is not responsible for any damages due to external causes, including but not
limited to, improper use, problems with electrical power, accident, neglect, alteration, repair,
improper installation, and improper testing.
4. CPU and motherboard are subject to damage if the product is incorrectly installed.
5. Excessive force exerted on the fan may cause damage to the fan and/or system.
6. This product is a CPU liquid cooling solution kit, composed of individual, original EKWB parts.
Combining this liquid cooling unit with parts, other than EK Water Blocks products, may lead
to warranty loss.
7. Product design and specifi cations may be revised to improve quality and performance.
8. You must not run the pump below 20% RPM. The pump must stay within a 20-100% PWM
duty cycle at all times. We recommend always running the pump at 100%. (For help on how to
control the PWM, please refer to your motherboard instructions.)

2. SPECIFICATIONS

Model
Dimensions
Radiator
Fin material
Dimensions
Speed
Air Flow
Life Expectancy
Fan
Noise Level
Bearing Type
Fan Connector
Fan Rated Voltage
Dimensions (mm)
RPM
Pump
Life Expectancy
Noise Level
Input Current
- 4 -
EK-Nucleus AIO CR240 Dark EK-Nucleus AIO CR360 Dark
277x120x27 mm 398x120x27 mm
Al Al
120x120x25 mm (2x) 120x120x25 mm (3x)
550-2300 RPM ±10% 550-2300 RPM ±10%
(PWM: 20-100%) (PWM: 20-100%)
72 CFM 72 CFM
70.000 hours 70.000 hours
36 dB 36 dB
FDB bearing FDB bearing
4Pin 4Pin
12V 12V
82.3x69.2x61.6 mm 82.3x69.2x61.6 mm
3100 RPM ± 10% 3100 RPM ± 10%
(PWM: 20-100%) (PWM: 20-100%)
70.000 hours 70.000 hours
18.5 dB 18.5 dB
0.37 ±10% A 0.37 ±10% A