Gprs Setting - MOB MO8734 Bedienungsanleitung

All manuals and user guides at all-guides.com
Turn on the device by Inserting Card
Please insert the SIM card in the correct direction. You will see the indicator light blinks,
then turns off. This means the SIM card has been inserted successfully.
Led indicator:
Solid blue: SIM card inserted incorrectly
Flashing blue: Searching for GPS signal
Blue off: Is working correctly
Red on: Charging the battery
Red off: Fully charged
Configuration and Operation by SMS
1. To Set the authorized Number
Command: CENTER,000000,phone number#
NOTE: The letters or symbols should be English and the letters should be in
capital.
Example: CENTER,000000,123456789#
※ Using your mobile phone, send the above command to the phone
number of the device, it will reply: Center OK!
※ To delete this number, you can send
the phone number of the device.

2. GPRS Setting

In order to use the GPRS function, the user needs to setup the APN by
sending an SMS command.
What is APN? Access Point name (APN) is the name used to identify a general
packet radio service (GPRS) bearer service in the GSM mobile network. The
APN defines the type of service that is provided in the packet data connection.
※ Make sure that the SIM card in the tracker supports the GPRS function.
※ The APN can be acquired from your local GSM operators.
Command: APN, APN information, user name, password#
Note: Some APN are without user name and password, so please leave it blank.
For example:
APN, internet#
※ please set it up when the device cannot connect with the web platform
or the APP.
APN, internet, 123,456#
(without the user name and password)
:CENTER,000000,0# to
(with the user name and password)