Other Functions - Marathon London BA030023-EU1 Bedienungsanleitung

Other functions

Press and hold the button to clear all outdoor data and
•
re-register your sensors.
In normal time display mode, press the
•
12 and 24 hour view setting.
In normal time display mode, press and hold the
•
enter and exit the RCC signal reception mode.
In normal time display mode, press the
•
to light up the backlight, press a second time to increase the
brightness.
In any setting, press the
SNOOZE/DIMMER
•
settings and exit.
Low battery indicator
If the low battery indicator
time to replace the unit with fresh batteries. A low battery indicator
will also appear for each sensor when batteries need to be replaced.
button switch between
button to
button
SNOOZE/DIMMER
button to save current
appears in the weather display, it is
Troubleshooting
If your clock does not function properly, which may be caused by
electro-static discharge or other interference, slide open the battery
cover, take out the batteries and reinstall them by observing the
correct +/- polarity. Your unit will be reset to the default factory
settings and will need to be setup again.
Caring for your product
1. Place your unit on a stable surface, away from sources of direct
sunlight or excessive heat or moisture.
2. Protect your furniture when placing your unit on a natural wood
and lacquered fi nish by using a cloth or protective material
between it and the furniture.
3. Clean your unit with a soft cloth moistened only with mild soap
and water. Stronger agents such as Benzine, thinner or similar
materials can damage the surface of the unit.
4. Do not mix old and new batteries. Do not mix alkaline, standard
(carbon-zinc), or rechargeable (nickel-cadmium) batteries.
5. If the unit is not to be used for a prolonged period, such as a
month or longer, remove the batteries to prevent possible
corrosion. Should the battery compartment become corroded or
dirty, clean the compartment thoroughly and replace the batteries.
EN