Quick Start - Gold Note PSU-1250 Bedienungsanleitung

| QUICK START

Installing the PSU-1250 and PSU-1000 is simple and takes only a few quick steps:
1
Turn OFF the MASTER SWITCH on the
Gold Note 1000 series of electronics and
remove the power cord.
2
Connect the PSU to the AC power outlet
using the supplied power cord.
The PSU-1250 and PSU-1000 are designed
for the electronics of the 1000 Series. When
a unit is powered by the PSU, the STATUS
LED of the unit changes colour from BLUE to
GREEN.
3
Connect the PSU to another unit using
the supplied PSU LINK cable (from the
PSU OUT on PSU-1250/PSU-1000 to the
PSU socket on the other unit).
4
Turn on the MASTER SWITCH on the rear
panel of the PSU.
INSTALLING THE PSU-1250 AND
PSU-1000
To achieve the best performance we
recommend to place the PSU at a reasonable
distance from other audio electronics. The
PSU shouldn't be placed over on under the
unit it is powering nor too close to other
electronics.
4
PSU Out
EN
DE
IT