Connecting To Homematic Ip Central Control Unit Ccu3 - eQ-3 homematic IP HmIP-WGD-PL Installations- Und Bedienungsanleitung

To integrate the device into your system and enable it to communicate
with other devices, you must first add it. The following set-up and control
options are available:
Connecting to the Homematic IP Central Control Unit CCU3
For local, software-based configuration and control via PC, you have the
option to connect the device to a Central Control Unit CCU3 and to use
it in a wide range of programs (see „5.3.1 Anlernen an die Zentrale CCU3"
auf Seite 31).
Connecting to the Homematic IP cloud
For flexible use via the free smartphone app, you can connect the device
to the Homematic IP cloud (see „5.3.2 Anlernen an die Homematic IP
Cloud per Wired Access Point" auf Seite 33). You can
• control the wired system via the smartphone app using the
Homematic IP Wired Access Point (HmIPW-DRAP) or
• combine wired devices with wireless Homematic IP devices via
the Homematic IP access point (HmIP-HAP).
5.3.1

Connecting to Homematic IP Central Control Unit CCU3

To easily operate and configure Homematic IP Wired devices via software
as well as use them in central control unit programs, you have to connect
them to the WebUI. To connect the device to the Central Control Unit
CCU3, proceed as follows:
• Set up your Central Control Unit CCU3 as described in the oper-
ating manual and connect the Homematic IP Wired Access Point.
• Start the user interface "WebUI" on your computer.
• Click the "Add devices" button on the right-hand side of the
screen.
• To activate pairing mode, click "Pairing HmIP device" in the next
Start-up
31