Navitel NS150 Benutzerhandbuch Seite 12

12 | USER MANUAL
Charging electronic devices
• Before use, press the power button to turn on the portable power station.
• To charge an electronic device, connect a USB-A or USB-C cable to one of the charging device's USB output ports, and connect the opposite end
of the cable to the USB port of the electronic device. USB-A output ports deliver 18W maximum, USB-C output port delivers 60W.
• To power up devices of up to 150 watts AC power, plug the inverter 12V-220V into the car cigarette lighter output, then connect the power
adapter of the electronic device to the inverter socket.
EN
• To start the car engine in case of a dead car battery, connect the car starting wire to the battery terminals, then connect the other end of wire to
the 12V car start output. Turn the car's ignition key to start the engine.
• Note: if the battery charge level is less than 50%, the engine may not start.
Charging portable power station
• To charge the portable power station, connect the USB-C end of the charging cable to the USB-C input port of the portable power station, then
connect the other end of cable to the output port of the device that will be charging NAVITEL NS150 (recommended to use devices with rated
power of 45 W).