Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB - Original instructions
Warning symbols .......................................................... 2
Illustrations ................................................................... 3
1. Safety ..................................................................... 10
2. Identification of the machine and components ....... 10
3. Unpacking and assembly ....................................... 10
4. Battery .................................................................... 11
5. Charger .................................................................. 11
6. Use ......................................................................... 12
7. Clothing .................................................................. 12
8. Tips and advices .................................................... 12
10. Maintenance ......................................................... 12
11. Storage ................................................................. 12
12. Specifications ....................................................... 12
13. Warranty terms and conditions ............................. 12
14. Troubleshooting ................................................... 17
EC Declaration of conformity ...................................... 18
Spare parts
Spare part drawings for the specific product can
be found on our website www.texas.dk If you
find the part numbers yourself, this will facilitate
more rapid service.
For purchase of spare parts, please contact your
dealer.
1. Safety
How to read the manual
Please read this instruction manual carefully, especially
the safety warnings marked with the symbol:
When using the product, the safety instructions must be
closely followed. Read this manual carefully before
starting the machine. Make sure that you know how to
stop and switch off the engine in case of accident. All
instructions regarding safety and maintenance of the
machine are for your own safety.
The warnings, precautions and instructions given in this
manual, cannot cover all situations that the product can
be placed in. The user must therefore present common
sense and caution when using the product.
Safety in the work area
•
Only use the product in clean and well lit areas
•
Do not use the product in areas with explosive
danger or where there is flammable fluids, gas or
dust present.
•
The person that uses the machine is responsible to
other persons in the work area. Never use the
machine when others, especially children or
animals are near.
•
This machine is an electric product. It is therefore
important, that it ever comes in contact with water
or is used in wet surroundings.
Use and maintenance of the product
•
This machine must not be used for other work than
as described in this manual.
•
Only use original spare parts. Mounting of non-
approved parts may lead to increased risk and are
therefore not legal. Any liability is renounced for
accidents or other damage that has happened due
to the use of unauthorised parts.
•
Before using the machine, the dealer or other
qualified person should instruct you in the use of
the machine.
•
Minors may not work the machine.
•
The machine may only be lent to people who know
how to work the machine. This manual should
follow the machine under all circumstances.
•
The machine may only be used by persons who
are rested, well and fit. If the work is tiring, frequent
brakes should be made. Do not use the machine
under influence of alcohol.
•
Always check before start, that all bolts and nuts
are tigthened.
•
Always wear eye protection when using the
machine.
•
Keep the trimmer head clean and free from
wrapped grass or weed.
•
Keep children and other persons at a distance of at
least 5 metres from the work area.
•
The battery should always be removed when:
1. maintenance is made.
2. the machine is left unattended
•
During transport, the main switch must be switched
off.
2. Identification of the machine and components
See Fig. 1 + 2
1.
On/off switch
2.
Safety lock
3.
Operating handle
4.
Battery pack*
5.
Shaft adjustment collar
6.
Safety hood
7.
Spindle plate
8.
Flower guard
9.
Cutting blade
10. Cutting head
11. Lock for cutting head inclination
12. Lock for cutting head rotation
13. Front handle
14. Push button for adjusting front handle
15. Push button for capacity display
16. Disolay for remaining capacity
17. Locking button
18. Control lights
19. Battery charger*
20. Screw for fitting spindle plate
21. Screws for fitting safety hood
*Battery/charger are not included for solo machines
3. Unpacking and assembly
1.
Unpack all parts and lay them on a flat, stable
surface.
2.
Remove all packing materials and shipping
devices, if applicable.
3.
Make sure the delivery contents are complete and
free of any damage. If you find that parts are
missing or show damage do not use the product
but contact your dealer. Using an incomplete or
damaged product represents a hazard to people
and property.
4.
Ensure that you have all the accessories and tools
needed for assembly and operation. This also
includes suitable personal protective equipment.
10
Werbung
