Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Insta GmbH
P.O. Box 1830
D-58468 Lüdenscheid
▪ Connection according to Figure 4
L
N
PE
SNT ELI 0 -110 W /30 V
L
N
/
Figure 4: Wiring diagram
Conductors on mains side
Live conductor L
Neutral conductor N
Protective conductor PE
Conductors on secondary
side
V+
V-
▪ Since the wire ends of the pre-assembled connecting cables are
tinned, do not use screw terminals but screwless terminals to
connect the electronic operating device.
▪ Keep all connections as short as possible to ensure good EMC
performance.
▪ Mains cables should be kept as far away as possible from the
electronic operating device and other lines (ideal distance
at least 10 cm)
▪ For installations in humid environments, ensure that also the line
connections are watertight so that no water can penetrate the
system.
Circuit breaker
Observe the maximum number of operating devices per circuit:
Circuit breaker
B10
B16
C10
C16
D 10
D 16
Telephone +49 2351 936-0
info@insta.de / www.insta.de
V+
V-
Conductor colour
brown
blue
green-yellow
Conductor colour
red
Black
Number of operating devices
max. 3 pcs
max. 5 pcs
max. 5 pcs
max. 9 pcs
max. 10 pcs
max. 17 pcs
Appendix
Technical data
Rated voltage:
Mains frequency:
Input current:
Connected load:
Power factor:
Efficiency:
Secondary voltage:
Output current:
Protection class:
Degree of protection:
Ambient temperature ta:
tc-point temperature:
Storage/transport temperature:
Housing dimensions (L x W x H):
Length of the pre-assembled connecting cable: 300 ± 20 mm
Secondary cable length:
Weight:
Warranty
We provide a warranty as provided for by law.
Please send the unit postage-free with a description of the defect
to our central customer service office:
Insta GmbH
Service Center
Hohe Steinert 10
D-58509 Lüdenscheid
Germany
AC 100 - 277 V ~
50/60 Hz
0.7 A at 230 V AC
1.5 A at 110 V AC
0 ... 110 W
≥ 0.96 at 230 V AC
93 %
DC 30 V =, SELV
0 ... 3.7 A
I
IP 67
-40 ... +60 °C
max. +80 °C
-40 ... +80 °C
221 x 69 x 40 mm
max. 100 m
1100 g
2018-05-03
824 016 00
Werbung
