Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SAFETY INSTRUCTIONS
Please read this operation instruction carefully before use, and keep it for future reference.
1. Before connecting the device to power supply socket, make sure the voltage
indicated on the device corresponds to the voltage in the power supply socket.
2. ALWAYS disconnect the product form the power mains when it is not in use.
3. When you disconnect the power cord of the device, grasp and pull the plug, not
the cord/cable.
4. The device is not intended for use by children. Keep the device out of the reach
of children.
5. Fixed power cable may only be replaced in an authorized service point.
6. Do not attempt to repair this device yourself. In case of damage, contact authorized
service point for check-up or repair.
7. Always disconnect the product form the power mains before cleaning.
8. Keep the device and its cord/cable away from heat, water, moisture, sharp edges
and any other factor which may damage the appliance or its cord.
9. Do not touch hot parts of the device.
10. Do not use this device near flammable/explosive materials.
11. Do not leave this device unattended while operating.
12. Do not use the product for purposes different from displayed in this operating manual.
13. Do not expose this device to strong shock.
14. Use only original accessories and tools.
15. Do not use this device if it has been damaged or its operation is abnormal.
16. Producer of this product is not responsible for damages caused by inappropriate
handling and using of the device.
17. Warning: this tool must be placed on its stand when not in use.
18. When not in use, the device should be stored in a dry location beyond the reach of
children.
19. In case of power cord damage, return to an authorized service point for cord replacement
or service.
20.Power will automatically be off when the unit exceeds a certain temperature. Once
the temperature has dropped to a safety level, power will automatically turn on.
21. The device can be used only in well ventilated places.
22.Do not use the device to heat liquids or plastic.
23.The device is intended for indoor use only.
EN
6
DISPLAY
1
3
2
4
5
1.
Temperature unit switch button
2. Airflow button
3. Shows set temperature; press the +/- buttons to adjust.
4. Airflow speed.
5. Airflow symbol. Press the * button- the symbol appears on the display, now you
can use the +/- buttons to adjust the airflow speed. After it is done, the symbol
will disappear.
6. It indicates that temperature is being adjusted. After it is done, it will disappear.
7.
Temperature units. The degree Celsius is set as default. Press the °C/F button to
switch.
8. Adjustment buttons
9. On/off switch
NOZZLES
There are three nozzles included in the set with the diameters of 5, 8 and 12 mm.
Push the appropriate nozzle on the heating element.
To remove it, pull it off the heating element.
GENERAL TIPS
•
Before attaching the nozzle make sure the device is switched off and disconnected
from power supply.
•
CAUTION. The air is extremely hot and can cause painful burns. Never touch the
heating element or the nozzle or allow the heated air to blow against your skin.
•
If you want to take a break during operation, put the device on the stand.
•
After use make sure to cool the device.
•
OVERHEATING PROTECTION. Power will automatically be off when the unit
exceeds a certain temperature. Once the temperature has dropped to a safety
level, power will automatically turn on.
8
9
7
6
7
EN
Werbung
Inhaltsverzeichnis
