Niceboy ION Outdoor Security Camera Bedienungsanleitung Seite 17

7. After turning on the device, reset by pressing the button for more than 5s. The LED on the camera
flashes.
8. Confirm that the LED is flashing and click NEXT to connect to the network. (In the case of a cable connec‑
tion, it is necessary to change the mode to cable connection on the Device Reset screen in the upper
right corner).
9. Follow the instructions in the app to enter the Wi‑Fi network name, enter the Wi‑Fi password, and click
NEXT (note: the camera can be connected via a 2.4 GHz Wi‑Fi network or via an Ethernet cable).
10. The QR code for connecting the camera is displayed on the phone screen. Read the QR code from the
phone screen with the camera from a distance of 15 ‑ 20 cm.
11. Camera is then added to the device list. You can change the name of camera before confirmating.
Connecting your device to a Wi-Fi network may take tens of seconds, depending on the signal
strength.
After the device is successfully connected, the control interface is displayed. This camera can also be
connected using an Ethernet cable.
Reset Wi-Fi: In case of connection timeout or before connecting another cell phone, first switch on the
device and, within 10 seconds, long press the Start/Stop button for 3 seconds till it beeps, and then re‑
connect it to Wi‑Fi network. After the password is set, proceed to the next step „Add Device" (3)
The APP serves as the control environment for the Niceboy ION Outdoor Security Camera. Function settings
and camera image display are performed via the Niceboy ION Application.
Install both antennas for the camera to work properly.
Niceboy s.r.o. hereby declares that the type of radio equipment Outdoor Security Camera complies with
Directives 2014/53 / EU, 2014/30 / EU, 2014/35 / EU, and 2011/65 / EU. The full content of EU Declaration of
Conformity is available on the following websites: https://niceboy.eu/en/declaration/outdoor‑security‑camera
17