Device Mode - Yealink MeetingBar A10 Schnellstartanleitung

7

Device Mode

1. Do one of the following to select Device Mode:
• When selecting a platform during power-on initialization, select Device Mode.
• Switch platforms after signing in:
Teams: Follow steps 1, 2 and 3 of
on the web user interface, select Device Mode and click Confirm.
Zoom: Go to Settings > General > System Settings > UC Provider and select Device Mode.
Wireless Content Sharing
2. Refer to the
8
WPP30
WPP30 cannot be used when the endpoint uses a wireless network.
i
Wireless Content Sharing
1. Connect the WPP30 to the
MeetingBar A10. Waiting for 3 seconds, MeetingBar A10
prompts "Wireless presentation pod pairing successfully".
2. Connect the WPP30 to the
of PC and press the Presentation button to share the
screen.
Wireless Device-USB Mode
1. Connect the WPP30 to the
MeetingBar A10. Waiting for 3 seconds, MeetingBar A10
prompts "Wireless presentation pod pairing successfully".
2. Connect the WPP30 to the
of the PC, and do one of the following on the Yealink
Wireless Presentation Pod Software:
• On Teams/Zoom mode, click BYOD Mode > Press to
share.
• On Device Mode, click Press to share.
Updating the Firmware
section.
USB-A
port of the
USB-A USB-C
port or
USB-A
port of the
USB-A USB-C
port or
6
section, then go to System > UC Provider
Sharing Video (Teams)
port
PC
port
Device Mode Video
Wireless Content Wireless Content
Sharing Video (Zoom)
Presentation button
WPP30
Wireless Device Wireless Device
USB Mode Video USB Mode Video
(Teams)
(Zoom)