Control Panel; Operation Of The Device - Stalgast 484419V01 Bedienungsanleitung

3. CONSTRUCTION OF THE DEVICE
3.1. Control panel

4. OPERATION OF THE DEVICE

1. Insert the power plug into the power outlet.
2. Place the jug in the drive socket. Make sure it is correctly and stably attached.
3. Set the TIME knob to the START position (continuous operation, no countdown function).
4. Put on the lid of the jug.
5. Press the POWER ON/OFF button.
6. To turn off the blender operation, press the POWER ON/OFF button again.
Note: Be sure to hold the jug by the handle while the machine is running.
Note: When the time control knob is set to the 0-5 position, the blender will only operate with the PULSE function.
7. Cutting element speed adjustment:
• LOW - lowest rpm
• HIGH - highest rpm
• PULSE button (maximum speed, requires the button to be held down while the blender is running).
1. lid cap
2. jug lid
3. jug
4. attachment mat for jug
5. infinitely variable speed regulator
6. on/off switch
7. pulse switch
8. timer
9. base
10. rubber feet
- 9 -