Replacement Filters - Maxvac DUSTBLOCKER 450 Gebrauchs- Und Wartungsanleitung

Compare the information such as Model, Size and Efficiency to see if it matches
the data on the new filter.
Make sure you insert the filter as indicated on the label; with the arrow pointing
towards the centre of the Dustblocker (away from you):
If the HEPA Filter is exposed to water, this may shorten or end
Pre-filters and HEPA Filters cannot be cleaned and must be
The DB450 is provided with a filter indicator connected to a warning led that
measures the pressure drop in the filter. In case of a pressure drop that is too high,
the red led will light up and the hepafilter must be replaced. If the Dustblocker is
used while the warning led lights up, this could affect the operation of the device.

REPLACEMENT FILTERS

DB 450
G3 Pre-Filter
G4 Front-filter
H13 HEPA Filter
DB 450
the filter's life span.
replaced if they are saturated.
Item Nº
MV-DBF-1302
MV-DBF-1301
MV-DBF-1300
Airflow
Replacement
1 x per week or when necessary.
1 x per 3 months or when necessary.
1 x per year or when necessary.
MAX-VAC.COM 9