Tesla SMART CAMERA BABY BD300 Bedienungsanleitung Seite 7

6. Wait for the device to complete the connection.
7. „Add device success" appears to indicate that the
device connection was successful.
In the camera interface, you can open settings by
clicking on the three dots in the upper right corner,
here you can set common functions.
Due to the continuous development of the App,
the layout and available features may be subject to
change.
PAIRING OF CAMERA AND MONITOR
- Power on the camera and the monitor, and they
will automatically connect. If the connection fails,
please follow the steps below to pair. The pairing is
distance limited, so make sure the distance between
the camera and the monitor is no more than 200m.
- Pair the monitor and camera
- 1. Press the Menu button on the monitor screen,
and select
- 2. Select the camera which you need to pair.
- 3. Press and hold the camera pairing button until
you hear the prompt tone.
- 4. Press the OK button on the monitor screen to
start pairing.
- Unpair the monitor and camera
- 1. Press the Menu button on the monitor screen,
and select
- 2. Select the camera which you need to unpair.
- 3. Press and hold the OK button to release the
pairing.
> Camera.
> Camera.
7