Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Spraying
Observe the instructions in the section entitled "Safety".
Operate the device only when it is standing or hanging upright.
Avoid allowing drops of spray to drift onto areas that are not being treated.
Observe the instructions of the spray product manufacturer.
1. Hang the device over your shoulder or on your back.
handle until no more liquid mixed with air is emerging from the nozzle.
2. Activate the spray handle [8].
Spraying may now begin.
The pressure cannot be controlled on the spray handle.
3. Make sure the optimum spraying pressure (4-6 bar) is set on the pressure gauge [10].
4. If the spraying pressure decreases more than 0,5 bar from the optimum level, pump some
more.
If liquid mixed with air emerges from the nozzle, the tank is empty.
After usage
1. Pull up the red button on the safety valve [12] until all excess pressure is released from the
tank.
2. Always leave the remaining product in the tank.
3. Clean the nozzle [13] with Innotec Multisol.
Clean the protective equipment every time after usage.
Faults
Use only spare parts and accessories from the manufacturer.
CE Declaration of Conformity
The Multi Sprayer 6 L complies with the Directive 97/23/EC for pressure equipment and is
provided with a CE mark.
Technical data
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty
Material of the tank
Technical residual quantity
6 L
9 L
6 bar
50°C
4,7 kg
Steel with polyester coating
0,03 l
Werbung
Inhaltsverzeichnis
