Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Testing the trailer lights:
Insert the trailer tester with the socket side facing down into
the connection cable of your trailer. Press the yellow switch on
the right side of the trailer tester. If all control lamps light up,
the lighting system of your trailer is OK. If one control lamp
does not light up, this may have one of the following causes:
Defective bulb, broken cable, cable not connected in plug, or
cable not connected in light.
Table for plug occupation
Connector Lamp
1
Left
indicator
2
Fog lights
3
Mass
4
Right indicator Green
5
Right rear light Brown
6
Brake light
7
Left rear light
6. CARE AND MAINTENANCE
Clean the trailer tester with a soft, dry cloth only. Do not use
aggressive cleaning agents or solvents.
Remove the battery from the trailer tester if you will not be
using it for a long time. After a longer period without use, treat
the plug contacts with a little contact spray.
7. NOTES FOR ENVIRONMENTAL PROTECTION
When this product reaches the end of its useful
life, it may not be disposed o in the ordinary
household waste, instead it must be submitted to
a collection point for the recycling of electrical and
electronic devices.
Batteries should not be disposed of in the ordinary
household waste! Use batteries are to be disposed
of at public collection points in your areas or wher-
ever batteries are sold.
The materials can be recycled. By recycling, reuse of materials
or other forms of reuse of old devices, you make an important
contribution to the protection of our environment!
4
Cable
Clamp
colour
designation
accor-
according to
ding to
DIN 72552
ISO 1724
Yellow
L
Blue
54 G or NS
White
31
R
58 R
Red
54
Black
58 L
8. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
Werbung
Inhaltsverzeichnis
