Lindy 43366 Benutzerhandbuch Seite 5

User Manual
Back panel:
7. DC Power Port: Connect the included power supply (DC 24V 5.41A)
8. Gigabit Ethernet port: Connection to high-speed network
9. 2x USB 3.2 / 3.1 Gen 1 / USB 3.0 port Type A (max. 5 Gbps): Connect USB devices
10. DisplayPort and HDMI port (Nr. 1): Connect either a DisplayPort or an HDMI display*
11. DisplayPort and HDMI port (Nr. 2): Connect either a DisplayPort or an HDMI display*
12. HDMI port Nr. 3: Connect an HDMI display (DisplayPort Alternate Mode support required)**
Please note:
*Only one display per group (Nr. 1 and Nr. 2) can be connected, either HDMI or DisplayPort.
**HDMI port Nr. 3 requires connection to a host computer with DisplayPort Alternate Mode support (USB
Type C or Thunderbolt 3 / 4).
Please note:
Do not connect the Docking Station to your laptop or Macbook before you have installed the drivers.
Only computers with Windows 10 (and higher) operating system install the drivers automatically when
connected to the internet, therefore the Docking Station can be directly connected to Windows 10/11
laptops.
Driver Installation in Windows 7/8/8.1 and macOS:
Download the drivers from www.displaylink.com. Run the installation and restart the laptop/MacBook after
the installation is completed.
Now connect the included power supply to the Hybrid Laptop Docking Station and to a wall socket. Press
the On/Off switch. Then connect the Docking Station with the included USB cable to your laptop or
MacBook. When the automatic port installation is complete, please restart the laptop/MacBook.
For Linux, Android and Chrome OS please also download the drivers from www.displaylink.com.
English