Power Led - Lindy 38355 Benutzerhandbuch

User Manual
Features
Supports resolutions up to 3840x2160@60Hz 4:4:4 8bit with HDR

4 x HDBaseT out and 1 x HDMI loop out to connect a local display

Audio Pass-through of all HDMI audio formats including LPCM up to 7.1CH, Dolby Digital, Dolby

TrueHD, Dolby Digital Plus (DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X
Coax audio formats PCM 2.0CH, Dolby Digital / Plus, DTS 2.0/5.1

Analog audio formats PCM 2.0CH

PoC (Power over Cable) support, requiring a power supply connection from only one side of the

installation (transmitter)
Bi-directional IR Control (20-60KHz)

RS-232 Pass-through

Advanced EDID management

Screw Type DC Jack for a secure power connection

Specification
HDMI 2.0b, 18Gbps Compliant

HDCP 2.2/1.4 Pass-through

The following distance and resolution combinations are possible when using high quality Cat.6 U/UTP

or F/UTP cable:
100m
1920x1080@60Hz 4:4:4 8bit

70m
3840x2160@60Hz 4:4:4 8bit / 4:2:2 12bit

ESD Protection: ± 8kV (air-gap discharge)

Human Body Model: ± 4kV (contact discharge)

Operating Temperature: 0°C - 40°C (32°F - 104°F)

Storage Temperature: -20°C - 60°C (-4°F - 140°F)

Relative Humidity: 20 - 90% RH (Non-condensing)

Metal Housing

Colour: Black

Power Requirements: AC100-240V 50/60Hz

Power Consumption: 37W

Installation
Front Panel
1. POWER LED: Indicates power.
2. IN LED: This will illuminate green when an active HDMI source is connected.
3. LOOP LED: This will illuminate green when a display is connected to the HDMI LOOP OUT port.
English