needit PARK LITE Gebrauchsanweisung Seite 31

warm up the windshield with
the vehicle's own blower or
carefully with a hair dryer.
4. Remove the protective film
from the adhesive pads and
press the parking disc firmly
into the desired position on
the windshield for 30 seconds.
Then check from the outside
whether the adhesive pads
adhere well.
5. Now your PARK LITE is
installed and ready for use.
Caution:
PARK LITE must not lie loose in the
vehicle but must be firmly mounted
to the windshield in order to function
properly.
31